DP-101ZL3-M-P-C

Dual Display Digital Pressure Sensor [For Gas], IO-Link compatible

Pressure Range : -100.0 to +100.0 kPa
Pressure Port : M5 Female Thread
Output : PNP & IO-Link Baud Rate COM3 supported
M12 Smartclick Connector Type

Field data collected and accumulated for “preventive maintenance” and “operation monitoring”. An analysis of such field data requires high-level know-how and time, causing a burden to people responsible for the production site management. The Self-Monitoring Sensor manufactured by Panasonic is capable of reporting sensor data and its own state to the host device through the I/O Link master. With the Self-Monitoring Sensor, you can immediately judge the state of the sensor and easily identify the cause of failure. Thus, this sensor contributes to the reduction of the burden experienced by the client in collecting and analyzing data.
Improvements to the digital display deliver a wide viewing angle along with increased clarity. The display pressure range and set pressure range have also been increased. Enhanced power circuitry Addition of a reverse polarity protection circuit to the transistor output circuit. Equipped with a 30 mm 1.181 in square compact-sized dual display. The current value and the threshold value can be checked at the same time, so the threshold value can be set and checked smoothly without switching to another screen mode. ON / OFF operations still continue while the threshold values are being set, so setting to the same sensitivity as dial control-type sensors is possible. Key lock function is equipped as well. The main display changes color in line with changes in the status of output ON / OFF operation, and it also changes color while setting is in progress. The sensor status can therefore be understood easily, and operating errors can be reduced. Three output modes are suitable for a wide range of applications.

Type	Gauge Pressure (For Gas)	Shape	Square	Applicable fluid	Non-corrosive gas
Pressure Range	-100.0 to +100.0 kPa	Pressure with standability	500 kPa	Pressure Port	M5 Female Thread
Selectable Unit	kPa	Digital Display	Yes	Output	PNP & IO-Link Baud Rate COM3 supported
Output Operation	NO / NC Selectable	Input supply	12 to 24 VDC	Connection Type	M12 Smartclick Connector Type
Response Time	2.5 ms	Enclosure	PBT	Protection	-
Particular Characteristics	4 digits + 4 digits 3-color LCD Display

iolink_sensor_e_cata.pdf

Download Catalogue

Related Products

DP-102ZL3-M-P-C

View Product