NA2-N20-PN

General Purpose & Slim Body Area Sensor

The slim-bodied NA2-N series fits right in your equipment, since it is only 13 mm 0.512 in thick and 30 mm 1.181 in wide. It dose not get in the way of your access to the machine. Both the receiver and the emitter feature job indicators, 102 mm 4.016 in wide, with red bright LEDs. When the sensing output and the job indicator input are connected, the job indicator can be used as a large operation indicator.By setting different emission frequencies for two sensors, mutual interference can be prevented. There is no problem even when the sensors are parallel installed for wide detections area coverage. Moreover, the set frequencies can be identified by how many times the emitting indicators is light up.The operation of the job indicator can be selected using the operation mode selection switch. Beam output can be stopped via the input of an external signal. This is an useful test input (emission halt) function when beginning operation.

Type	Thru-beam	Shape	Rectangular	Sensing Height	380 mm
Sensing Range	5 m	Output	PNP	Output Operation	NC
Input supply	12 to 24 VDC	Emitting Element	Infrared LED	Connection Type	Fixed Cable, 3m
Beam Pitch	20 mm	No. Beam Channels	20	Sensing Object Size	ø30 mm
Response Time	< 10 ms	Enclosure	Heat-resistance ABS	Protection	IP40 (IEC)
Particular Characteristics	-